NSP dredger "SMP-1"
Type: suction non self-propelled dredger with diesel and sectional
Designation: development of sand and gravel soils of I-IV and I-III category respectively, transporting it as a water-mixture (slurry) to a place of installation or recycling.
Owner: JSC "NSC Arkhangelsk".
The dredger has an engine bilge type room in which are located a soil pump, a diesel engine and accessories. An auxiliary electric unit is located on the deck.
There is a crane on board with an electric hoist (lifting capacity - 1 t) for the maintenance and repair of the soil pump.
The dredger has a control cabin (wheelhouse), a latrine and a household pantry.
A wheelhouse and an engine room are provided with ventilation and heating. The dredger has a wheelhouse measuring system with an industrial computer to supervise a dredging process, issuing information of the key operational parameters.
The dredger is equipped with a plastic slurry-pipeline DN 300 with ball joints.
Additionally, the kit supplied with the dredger:
- a crane (lifting capacity - 2 t) for laying anchors and maintenance dredging and floating slurry-pipeline;
- a floating pumping station for water recycling;
- a residential unit for team members to stay on the shore;
- an exchangeable soil intake device with: cutterhead, hydroripper, ejector suction head or hydromechanical bucket ripper.
The dredger can be relocated in a disassembled form (road, sea, rail). The dredger set with 24 intermediate sections of a floating slurry-pipeline (150 m) can be shipped in 18 wagons.
|Year built, Builder||2003, Rybinsk|
|Russian River Register class||Р 1,2|
|Performance on pulp, m3/h||1600|
|Pressure, m water column||25|
|Type of soil pump||GrAU 1600/25|
|The drive slurry pump||diesel 6ChNSP-8/22-315|
|Depth of the development, min, m||1,5|
|Depth of the development, max m||8|
|Pulp transportation distance (without aux. station), m||1100|
|Diameter of the discharge pipe-line, mm||300|
|Tractive effort of winches, kN||20 (2)|
|Type of aux electrical unit||AD 100-T400-RMP|
|Fuel tank capacity, t||15|
|- Length max, m||40,3|
|- Hull length, m||23|
|- Beam, m||6,2|
|- Depth, m||5|
|- Draft, m||1,25|
|- Draft middle, m||0,7|
|Cutter diameter, m||1,0|
|Drive power, kW||37|
|Type of hydro-ripping pump||1D200-36|
|Drive power, kW||37|
|Method of displacement||anchors and ropes|